FAQ 2

How can I remove ceramic and natural stones easily?

codex Keralift is a special fibre fleece for use under ceramic tiling and calibrated natural stone tiles. During later renovation it allows simple, fast and clean removal of large and small tiles or stone.

codex Keralift fleece is bonded to the substrate using liquid codex Keralift tackifier and acts as a fixative for the tiles. Unlike normal installation direct to the substrate, installation on codex Keralift offers an advantage when it comes to later removal.

Apply a thin, even coat of codex Keralift tackifier onto the flat, smooth surface equal to the width of the sheet (1 m) using a foam roller.

Apply a thin, even coat of codex Keralift tackifier onto the flat, smooth surface equal to the width of the sheet (1 m) using a foam roller.

Install the codex Keralift fleece and wait 24 hours.

Install the codex Keralift fleece and wait 24 hours.

Use codex Power CX 3 or codex Power Maxx as an adhesive.

Use codex Power CX 3 or codex Power Maxx as an adhesive.

Then install the ceramic or natural stone.

Then install the ceramic or natural stone.

Then use an appropriate flexible grout.

Then use an appropriate flexible grout.

Use codex SG 10 or codex SG 20 to seal any joints.

Use codex SG 10 or codex SG 20 to seal any joints.

It's then easy to remove at a later date.

It's then easy to remove at a later date.